Is PAT testing easy?

Unless you have a very good understanding of the workings of electrical equipment, and the relevant training to be able to use and fully understand portable appliance testers, it is not recommended that you carry out your own PAT test.

How hard is PAT testing?

The PAT is difficult, and it is designed to be that way, so do not feel disheartened if you feel you did not do your best as chances are everyone will have felt that way. Maximise your PAT score through effective PAT preparation.

Can you fail a PAT testing course?

If the candidate should fail, the examination may be taken again at no further charge. Topics covered by the PAT Testing Training DVD Course: Introduction. The Test Card.

How long does a PAT test take?

The duration of a single PAT test is usually around 2-5 minutes. However, the total timeframe for PAT testing depends on the size of the premises and the number of appliances that need to be tested.

Can I do PAT testing myself?

Yes, your business can carry out its own PAT tests, as long as the person doing the testing is a 'competent' person. If you decide to do your own PAT testing we would strongly recommend taking a PAT testing course as it's important to perform the PAT tests correctly.

The Basics of PAT Testing

What will fail a PAT test?

Electrical equipment can fail a PAT test for several different reasons, including: The equipment won't power on. The casing is cracked or damaged. The equipment has exposed parts.

How can I pass PAT testing exam?

How many items can you PAT test in a day?

How many items can you PAT test in a day? The amount of items that can be PAT tested in one day depends on the location. As a general guide, an experienced PAT tester can PAT test up to 300 items in an office setting and up to 150 in an industrial setting.

What is the average charge for PAT testing?

The average cost for PAT testing is around £1-£3 per item. However, you may be able to get discounts if you have a significantly large number of items that need to be tested. Some companies may choose to charge an hourly rate, which could be around £40-£60.

How much does a PAT testing course cost?

There is no exam on our course, but a closely supervised practical session to ensure everyone benefits from the training, and everybody learns the required skills. BOOK ONLINE TODAY and pay just £225.00 + VAT per person.

Can you PAT test without being an electrician?

You do not need to be an electrician to carry out visual inspections. Low cost user checks and visual inspections are a good method of Maintaining portable electric equipment.

Does PAT testing affect insurance?

An insurance company may reduce, delay or even refuse to pay on a claim for damage if an appliance that has not been tested has caused the damage.

Is PAT testing really necessary?

PAT testing itself is not a legal requirement. Technically, you don't have to PAT test any electrical equipment in the workplace. But you better have an equally effective method of ensuring appliances are safe because there's a range of electrical safety obligations on employers. The Health and Safety at Work etc.

Why is the PAT so hard?

The test is designed to stretch candidates further than they have been stretched before, and it's not uncommon to find the past or specimen papers very difficult. However, the university provides resources to help candidates prepare, including a PAT preparation webinar and past papers.

Is there good money in PAT testing?

The average salary for PAT Testing jobs is £32,500. Read on to find out how much PAT Testing jobs pay across various UK locations and industries. We have 94 jobs paying higher than the average PAT Testing salary!

How many questions are on the PAT exam?

The DAT PAT (DAT Perceptual Ability Test) is one of the four sections of the Dental Admission Test. It has 90 questions and a time limit of 60 minutes. This section is composed of six separate 15-item sections.

Is PAT testing being phased out?

But with the emphasis on inspection and testing all equipment, whether portable or otherwise, references to 'PAT' have been removed from the COP. The 5th Edition promotes greater application of 'User Checks' of electrical equipment. A Poster is included to help promote user checks in the workplace.

Is PAT testing every 2 years?

Portable equipment such as extension leads should be tested every 2 years. Handheld and more frequently used and transported equipment should be tested every 12 months due to the increased risk of damage.

Can you PAT test a cooker?

Fixed appliances are often overlooked

Testing of fixed appliances doesn't get done as part of the PAT Test – we will check fixed appliances for earth continuity if available, and do a visual inspection, and recommend a full appliance test be carried out inline with the EICR by your electrician.

Can you PAT test a washing machine?

How to PAT Test a Microwave, Fridge, or Washing Machine. Testing these appliances follows a similar process as they are all metal-cased Class I appliances. The first test is an earth continuity test. For mains-powered test instruments, select a high-current test.

Do washing machines need PAT testing?

For landlords, it's good practice to have all your appliances PAT tested before a new tenant moves in. After this, smaller appliances should be tested every two years and larger items like fridges and washing machines should be tested in four-year intervals.

Is the PAT testing exam open book?

Once you feel confident, sit the twenty-four-question multiple choice exam. This open-book test has no time limit. It can be sat as many times as necessary to attain a pass mark (70%+); although we are confident that you'll pass the first time.

Can I do a PAT testing course online?

Our online PAT Testing training is purely a vocational course and does not qualify you to carry out PAT testing on other people's property. This course is for anyone who wishes to update their knowledge on this subject or is going to be carrying out PAT testing on their own premises.

Why would a microwave fail a PAT test?

Microwave failures can come in a couple of different forms, with the most common being exposed rust. This is caused by users not keeping the door open after cooking something and the steam and condensation causing the paint to peel away. This reveals the bare metal underneath, thus causing it to rust.

Why do washing machines fail PAT testing?

There are several other reasons why appliances may fail PAT testing, such as: use of aged PAT testing equipment. equipment not regularly calibrated. use of wrong equipment for the appliance type.