There are plenty of things you can do to prepare for the PAT, but remember, this is meant to be a challenge. Expect to be asked questions that are difficult! But, do not be put off by a tough paper! Embrace the challenge, and give it all your best thinking!
The PAT is difficult, and it is designed to be that way, so do not feel disheartened if you feel you did not do your best as chances are everyone will have felt that way. Maximise your PAT score through effective PAT preparation.
The test is designed to stretch candidates further than they have been stretched before, and it's not uncommon to find the past or specimen papers very difficult. However, the university provides resources to help candidates prepare, including a PAT preparation webinar and past papers.
The exam follows the City & Guilds 2377 syllabus and is open book; you can use the IET Code of Practice for In-service Inspection and Testing of Electrical Equipment during the exam. To pass, you must achieve at least 80%.
Here is a HARD Physics Question from the Oxford PAT exam
What will fail a PAT test?
Electrical equipment can fail a PAT test for several different reasons, including: The equipment won't power on. The casing is cracked or damaged. The equipment has exposed parts.
The duration of a single PAT test is usually around 2-5 minutes. However, the total timeframe for PAT testing depends on the size of the premises and the number of appliances that need to be tested.
If the candidate should fail, the examination may be taken again at no further charge. Topics covered by the PAT Testing Training DVD Course: Introduction. The Test Card.
Once you feel confident, sit the twenty-four-question multiple choice exam. This open-book test has no time limit. It can be sat as many times as necessary to attain a pass mark (70%+); although we are confident that you'll pass the first time.
Legally, in order to adhere to these regulations the person carrying out the PAT testing must have adequate training in how the process is carried out. Technically anyone can carry out PAT testing, but they must have the necessary training to deem them suitable for carrying out the work.
The DAT PAT (DAT Perceptual Ability Test) is one of the four sections of the Dental Admission Test. It has 90 questions and a time limit of 60 minutes. This section is composed of six separate 15-item sections.
You will also be faced with many different question styles. Calculators are permitted for the PAT, however, make sure to check if your calculator is on the specified list otherwise you will not be allowed to use it during your Admission Test.
A qualified and experienced PAT tester can test properly on average 150 items per day in an industrial setting and up to 300 items per day in an office setting.
Do You Need a Qualification for PAT Test? You don't need any specific qualifications for the PAT test. Yet, the regulations demand that a competent person does the testing. A skilled person is – “Someone with enough technical knowledge to avoid potential risks and injuries.”
They also have a legal responsibility to ensure the safety of employees and the public. Because PAT testing is one of the most effective ways to do this, particularly for high risk or large, complex environments, it has become a standard way of meeting this legal obligation.
PATs are multiple-choice tests designed to help teachers determine achievement levels of students in Mathematics, Reading Comprehension and Vocabulary, and Listening Comprehension.
Our online PAT Testing training is purely a vocational course and does not qualify you to carry out PAT testing on other people's property. This course is for anyone who wishes to update their knowledge on this subject or is going to be carrying out PAT testing on their own premises.
A PAT test Certificate is a document issued to you following completion of the PAT test. It's a record of what has been done. Records take all kinds of format from a hand written list to a fancy PDF document.
As an organisation, there are actually a number of different options available to you. PAT testing, despite public opinion, doesn't have to be carried out by a qualified electrician. In fact, absolutely anybody who is deemed competent can carry out PAT testing.
Portable equipment such as extension leads should be tested every 2 years. Handheld and more frequently used and transported equipment should be tested every 12 months due to the increased risk of damage.
While there is no official expiry date on a PAT test certificate, it is recommended that you should re-test Class 1 electrical equipment every 48 months and Class 2 electrical appliances every 24 months.
You do not need to be an electrician to carry out visual inspections. Low cost user checks and visual inspections are a good method of Maintaining portable electric equipment.
Larger equipment such as fridges can have longer leads, and in some cases a longer earth path as part of their construction, and a PAT tester can initially indicate a fail when carrying out the earth continuity test.
Microwave failures can come in a couple of different forms, with the most common being exposed rust. This is caused by users not keeping the door open after cooking something and the steam and condensation causing the paint to peel away. This reveals the bare metal underneath, thus causing it to rust.
The average cost for PAT testing is around £1-£3 per item. However, you may be able to get discounts if you have a significantly large number of items that need to be tested. Some companies may choose to charge an hourly rate, which could be around £40-£60.